link to How To Organize A Bathroom Closet. Fire-rated plywood is specialty plywood that was made by pressure-infusing plywood with flame-retardant chemicals. Fire-rated plywood is expected to protect a home for at least one to two hours in the event of a fire. CenturyPly enriched with Firewall technology is certified as the best in class by Indian , American and British standards when measured against critical parameters like flammability, spread ability, penetration and smoke developed index. "contactType": "Customer Service" 8 Commercial Blvd, Suite E "@type": "Organization", Two doors, each with a fire protection rating of 1 1/2 hours, installed on opposite side of the same opening in a fire wall, shall be deemed equivalent in fire protection rating to one 3-hour door. Fire resistance can be added to plywood in several ways. The wood then undergoes a series of quality control checks to ensure that it is able to resist ignition and slow the spread of fire. w/ 3/4" wood flooring, lowered 2" x 4" frame @ 16" o.c., w/ 2 layers 5/8" GWB, 2" x 12" joists @ 16" o.c. - Suffocation caused by smoke and other toxic gases emitted during fire accidents is a major problem. Fire-retardant materials will catch fire but are treated to slow down the spread of flames and limit smoke. Using Fire-Rated Drywall The 5/8-inch, "fire-code" drywall (called Type X) increases a wall's fire rating to a minimum of 1 hour, from the 30-minute rating for standard -inch drywall. Email: Fire-rated plywood and lumber come in a range of thicknesses and sizes. In order for wood to be considered fire-rated, it must have undergone a pressure treatment that infuses it with chemicals that give it fire-retardant properties. This makes it a safer type of wood to use in home structures and backboarding. ',(az36\\\\02" + Novato, This classification covers most residential requirements and can also meet commercial requirements for 20-minute. The fire retardant treatment we would always recommend is a factory applied, deep impregnation of all faces. Most economical fire retardant paint Meets all ASTM E-84 requirements High performance Easy to use and apply Eco-friendly Usable on various combustible materials 3/4" wood frame, embossed tin, 2-1/2" x 11-1/2" F/D @17"o.c., span 21', live load 40lbs, 2 layers 5/8" Type X GWB, embossed tin, 2" x 12" @12" O.C. w/ 1" x 8" wood plank & 1 layer 3/4" T&G wood, span 17', live load 40 lbs, 1-3/4" x 12" mini lams @ 16" o.c./ 2" x 12" F/D joists @ 16" o.c., w/ 3/4" T&G wood floor, span 23', live load 60lbs, 2" x 12"rough sawn joists @16" o.c., w/ 1-1/4" hardwood planking, span 15', live load 40lbs, 3" x 12" F/D joist @ 16" o.c., 1 layer 1" wood plank, 1 layer 1/2" OSB, 1 layer 3/4" T&G wood, span 10'-11', live load 100lbs, 3" x 14" F/D joists @16" o.c., 1 layer 3/4" wood plank, 1 layer 3/4" T&G wood, Span 15', live load 100lbs, 2" x 12" F/D joists @ 16" o.c. "telephone": "+1-415-459-6488", "x.charAt(i+1);try{o+=x.charAt(i);}catch(e){}}return o;}f(\"ufcnitnof x({)av" + ',(az36\\\\02" + You have been logged out due to inactivity. "contactPoint": [{ Detailed description: A 30-minute fire separation floor/ceiling includes: one layer of 16 mm (5/8") plywood subfloor on joists; 38 x 241 mm (2" x 10") joists spaced 406 mm (16") on centre; 89 mm (4") thick fiber- type insulation between the joists; one layer of 16 mm (5/8") fire-rated drywall on ceiling; Good to know: A wall built . In areas like schools, hospitals, gymnasiums, and major retail stores, fire=rated plywood is used to help ensure that the structure is as safe as possible for people around the area. X wood flooring, 1" x 3" wood spacers, embossed tin, 1-3/4" x 13-1/2" F/D @ 24"o.c., span 26', live load 40lbs, 3/4" T&G hardwood floor, 1" T&G pine ceiling, embossed tin. We stock a wide range of Fire Retardant Panels, which include MDF, Chipboard, Plywood and OSB. This numerical point of reference measures how quickly and far a flame will spread during a test that spans 10 minutes. span 14', live load 40lbs, 2"X 6" wood planks, ceilingr 5/8" sheetrock, 2" X 12" joists @ 16" o.c., w/2-1/2" wood decking , 1 layer 5/8" GWB, 2" x 4" web trusses @ 24" o.c., span by engineer, load 60lbs, 1 layer 3/4" plywood, 1 layer sound mat, 1 layer gypcrete,1/2" RC channel, 5/8" type "X" gwb, 2" x 4" wood web trusses2' deep @ 24" o.c., 3/4" OSB T&G subfloor, 1/2" cellulose sound board, 1 layer 5/8"type X GWB, 15" wood web joists @24" o.c., R-20 fiberglass batts, subfloor 3/4" osb, span by engineer, load 40lbs, ceiling 5/8" type X osb, 18" web trusses @116" o.c., span by engineer, load 40lbs, subfloor 3/4"plywood, ceiling 5/8" type X gwb, 2" x 4" trusses w/2" x 6" bottom chord @ 24" o.c. Have a Question About Assemblies? compare. Fire-rated plywood, like most other types of wood, can vary greatly in cost. ASTM E84 Extended 30-Minutes, UL 723, CAN/ULC-S102M. The Only Wallboard Specifiable for Sustainability. A range of clear and white intumescent fire-resistant paint for wood. A Fire-Retardant-Treated backboard will be designated with a fire-rated stamp "branded" or "stamped" along the edge or center of the plywood"UL FR-S Plywood 1780 R-7003." . Another unfortunate effect of fire is death due asphyxiation caused by toxic gases and smoke emitted during a fire. A coating of Ff88, in matching color was applied to the ceiling to meet the fire rating required by the City. It is a very lightweight material that is easy to transport and machine on site. Jeld-Wen Internal Flush Paint Grade Plus FD30 Fire Door 2040 x 44mm Retail price From 96.32 each From 80.27 ex. To be officially considered fire-retardant, treated wood must have been infused with the chemicals in a pressure process and have a listed Flame Spread Index of 25 or less in testing. 157.49 Inc Vat. Any fire-resistant paints, varnishes or other coatings you purchase are specifically developed to meet a particular level of fire protection. w/ 1/2" plywood roof decking live load 20lbs, 2" x 6" F/D joists @16" o.c. The flame spread index of centuryply fire-retardant plywood is 12, which means that it has class A properties and won't burn easily. View. vat Width (3) Delivery Select type Collection Select type Add first Review Product Code: 9000177547 Internal Moulded 4Panel Grain FD30 Fire Door Retail price From 126.50 each From 105.42 ex. Fire Rated. and other manuals, 10" TJ'I's @ 16" o.c. for a 19mm thick ply should be min 20 minutes, Minimum of 2.5times the thickness of ply in minutes, Greater than 3 times the thickness of ply in minutes, Delaying the spread of fire and not acting as a medium for the spread or rapid burning, Self-extinguishing once the source of fire is removed, Emitting less smoke to protect against suffocation. w/3/4" T&G plywood flooring, span 12'-6", live load 100lbs, 2-1/2"x11-1/4" F/D joists@14" o.c. . This treated wood will char but not oxidize, dramatically reducing the progress and spread of fire in buildings. View. Modern buildings are designed with safety in mind, and one of the biggest threats to many structures is fire. Type X or C drywall is 5/8 inches thick. "contactType": "Customer Service" We recommend that suitability of a Euroclass rated panel within the design is based upon 3rd party assessment or independent testing specific to the project in question. These tests check for char depth under specific burn conditions as well as structural integrity. They also come in a hardwood construction which means they are available to paint. For Wood Products, call: 1-800-284-5347; For Gypsum Products, call: 1-800-225-6119; Fire Safety Important Fire Safety Information regarding: PDF: Georgia-Pacific Fire Rated Products (65KB/2pgs) PDF: Fire Rated Building Assemblies and Components of Fire Rated Assemblies (19KB/1pgs) PDF: HRA Finger-Jointed Lumber Products (79KB/2pgs) PDF: Georgia-Pacific Gypsum FireDefender Firedoor Components . Premier Fire Doors 30-minute fire-resistant doors (FD30) are certified under the BWF certifier scheme and come with a manufacturer's warranty which ensures that you are safe in the event of a fire. w/ 1/2" plywood (beam span 10') live load 20lbs, 2" x 4" F/D rafters flat @ 16" o.c. FD30 FIRE DOOR RANGE. Liberty Doors Internal Oak Fully Finished Farley FD30 Fire Door (PFIOFARFD) From 171. or 1 layer 5/8" GWB, live load 40lbs, 11-7/8" TJI @16" o.c., w/ 1 layer 3/4" T&G plywood, 1 layer 5/8" GWB, live load 40lbs, 2" X 12" joists @ 16" o.c., span 16', live load 40lbs, w/1/2" plywood, 1/2" soundboard, ceiling 1 layer 5/8" GWB, 2" x 6" joists @16" o.c., span 10', live load 60lbs, 1-1/2" gypcrete, 3/4" osb subfloor, 1/2" type C or 5/8" type "X" gwb, 2" x 10" joists @ 16" o.c. "\\\\7503\\\\\\\\^JO]VT5[02\\\\\\\\0j01\\\\\\\\_QXF7D01\\\\\\\\14\\\\0q\\\\D" + Any thickness is allowed, but plywood is rated for various spans "for best performance." Look on the plywood sheets and they have a grade stamp, like 24/16. This paint is especially suitable for use on insulation board, MDF board, plasterboard, wood . Pull-down stairs in a garage ceiling would be required to meet the requirements of 1/2 drywall or equivalent, or have a 20 minute fire-rating. A special chemical process gives the wood properties that result in reduced damage to the structure in a fire. Regular 5/8" gyp board only gives 30 minutes of rating while gypsum type X can give 1 hour. Products like Interior Pyro Guard lumber and plywood come in 48 sheets in lengths ranging from 8 to 16 feet. You can check more on the Plywood Requirement Calculator on the website. wood stud wall, 2 layers 5/8" type "X" GWB each side, 1/2" plywood, 2" x 6" wood studs @ 16" o.c., 3/4" plywood, 2" x 4" F/D @ 24" o.c., shear wall 1/2" plywood, common wall 7/8" redwood, Roxul mineral wool batts, finish wall 3/4" plywood, 2" x 4" F/D @ 24" o.c., shear panels, Roxul min.wool batts, finish wall 3/4" AC plywood, EXT shear wall 1/2" plywood, waterproof membrane, hardi-board, 2 x 8 F/D joists@16" o.c., span 12-14' live load 40lbs, 3 layers 1" x (wood), 3 x 6 T&G Wood, 12 x 13" F/D @ 9' o.c. var x = "function f(x){var i,o=\"\",l=x.length;for(i=0;i((iif){" + So the existing standard warranty terms remain applicable. "\\\\7503\\\\\\\\^JO]VT5[02\\\\\\\\0j01\\\\\\\\_QXF7D01\\\\\\\\14\\\\0q\\\\D" + 35' span, w 2" x 4" joists @ 24o.c. span 8', span 8', 3" x6" ledger, trusses metal "I" joists @ 8" o.c. These properties of the fire retardant ply include: Lifetime Warranty For ArchitectPly / 30 years Warranty for ClubPrime. If you need fire-rated plywood, get in touch with the wholesale lumber dealer at Curtis Lumber & plywood. These guides will help you determine whether or not you want to use a particular type of fire-rated plywood. A: Pressure-treated plywood resists rot and insect damage, unlike traditional, untreated plywood. It looks like you entered an employee email address, but this is the customer sign-in. "url": "https://www.firefree.com", It also allows more time for getting the fire under control and for those inside the building to escape. So, if fire is a concern, its crucial to choose a material that works with the risk and is capable of mitigating problems that could arise. FlameOFF Fire Barrier Paint has been tested to ASTM E119/UL 263 and ASTM E84/UL 723 Fire Endurance standards to meet the requirements set forth by IBC/NFPA Building Codes. The International Building Code requires a smoke-developed index of less than 450. w/ 3/4" T&G plywood, ceiling 1/2" non -rated GWB: GFC101: Gypsum: Floor / Ceiling: 1-Hour: 2" x 10" @16" o.c., span 12'-14', live load 40lbs., w/ 3/4" wood sheathing . CSA 080.20 for lumber and CSA 080.27 for plywood To view the range of Flame Proof MDF click here For example, the brand or product label appears above the name and location of the treating manufacturer so that buyers can check the reputations of the companies that made the wood. Fire rated means the plywood is pressure-treated to prevent fire ignition over a period of time--30 or 90 minutes. It is important to ensure the stamp on the wood is displayed in a visible manner for inspection purposes. Quick buy. However, the story doesnt just end there. Quality is rated by the American Plywood Association (APA), which is accepted by most building codes, so look for the APA . ATM manufactures grade A doors to the highest Standard as certified by SATAS ( SANS 545). Fire-rated plywood is available from general home improvement stores and lumber suppliers throughout the nation. Many Veneer & Size Options to Choose From. Its not going to be totally inflammable. Inorganic materials like tile and brick also fall under the Class A category. (kfqcqm/u0t02\\\\\\\\30\\\\01\\" + Drywall typically comes in 1/4-inch, 3/8-inch, and 1/2-inch thicknesses. 2" x 6"@24"o.c. You can even get free wood cutting services at most hardware stores too. Fire-retardant materials will catch fire but are treated to slow down the spread of flames and limit smoke. Table 715.4 / 716.5: Fire Door and Fire Shutter Fire Protection Ratings a. Suitable for both internal and external use. Don't worry; you don't have to compromise on style just . The species of wood is also identified, along with the method that was used to dry the wood following treatment with fire-retardant chemicals. The board's excellent fire resistance rating makes it ideal for lining walls and ceilings in commercial spaces like offices and shopping centres, as well as in low rise housing and new build garages. Fire Rated. With the second method, you may not get as much fireproofing. }] "@context": "http://schema.org", It has been certified as the best in class to fight fire accidents and has some key properties that can be beneficial in the unfortunate event of a fire accident. Her interests include art and real estate investments. Rated FD30, this means our Plywood Flush FD30 Fire Door is fire resistant for 30 minutes, allowing time to safely escape in the event of a fire. When is fire-rated plywood required? When in doubt, ask a store associate whether or not the plywood you want to buy makes the grade. w/1-1/8" T&G plywood floor, 1-1/2" gypcrete, span 31-34', live load 60lbs, 28" TJ''s (metal tubing) @24" o.c. Standard precautions such as dust masks and goggles are sufficient when working with this type of wood because the chemicals used to give it fire-retardant properties are not considered hazardous. w/ 4layers of wood flooring, total 2-1/2", span 23'-24', live load 40lbs, 3" x 14" joists @ 16" o.c., w/3/4" T&G plywood, 1-1/4" gypcrete, span 16', live load 40lbs, 7-1/4" x 13" joists @50" o.c., w/ 3" wood planking, 3" concrete supported on double 6" x 15" beams, span 17', live load 60lbs, 8" x 12" F/D joists @ 8' o.c., w/ 3" x 6" T&G wood floor, span 25', live load 40lbs, 2" X 4" web trusses @ 19'-2" o.c., w/3/4" T&G plywood, span engineered, live load 60lbs, 3" x 10" F/D @ 16" o.c., w/multiple layers of wood @ 2-1/4" thickness, span 9', live load 60lbs, 2" x 14" joists @ 16" o.c., w/ 2" x 4" diagonal bridging @ 8" o.c., span 25', live load 40lbs1 layer 1" diagonal wood sheathing, 2" x 14" F/D joists @ 16" o.c., span 11'-6", live load 40lbs, 1 layer 1" diagonal wood sheathing, 11-7/8 TJI's @ 16" o.c., live load 40 lbs, 3/4" T&G plywood, 7" x 13" @ 48" o.c., live load 40lbs, Beams Double 7-1/2" x 19", span 19'-3", 3" T&G wood plank, 2-1/4" x 13-1/2" wood@16" o.c., span 16', live load 60lbs, 2" wood decking, 2" x 11-1/2" f/d oak @12" o.c., span 18', live load 60lbs, 1" hardwood oak planking, 8" diameter beams @48" o.c. the rate of fire growth, total heat release, smoke production and burning droplets are measured by testing samples of the products to EN 13823 (The SBI test) and . b. Add to basket. w/3/4" T&G OSB, live load 40lbs, 2" x 10" rafters @24' o.c. 94949. - The world-class fire-retardant plywood comes to you at no extra cost whatsoever. "telephone": "+1-888-990-3388", "@context": "http://schema.org", Fire-retardant wood is tested to determine characteristics such as smoke-developed number and flame spread. However, products like Exterior Fire-X lumber and plywood can be used both outdoors and inside for siding, fascia, trim, roof sheathing, and scaffolding. link to What Kind Of Paint For Garage Walls? In ASTM Fire retardant properties are defined as per Class and this majorly classified by the combination of Spread of fire and Smoke emission Index. Once a source of fire for e.g. UL Classified with an FR-S Rating for flame spread and smoke development values of 25 or less. When youre first getting used to the world of woodworking, materials become a major cornerstone of your new hobby. Find Centuryply Dealers Ossiana Tepfenhart is an expert writer, focusing on interior design and general home tips. The air is then removed to create a vacuum into which the chemicals are added. It is ideal for painting or upgrading existing wood or timber surfaces to either 30 or 60 minutes of fire protection. "url": "https://www.firefree.com", FD30 fire doors range from oak, white, unglazed and glazed. In other words, it would actually take active exposure to fire to make your plywood actually burns. If your project requires lumber that has been fire-rated, you need to buy lumber that specifically has a fire rating stamped on it. , w/1" x 8" wood planking over metal trusses 94' o.c.) After being dried in a kiln, the wood is placed inside a retort chamber. ceiling (suspended), embossed tin, 2" x 12" F/D @ 16' o.c., span 18'-20', live load 40lbs, 1/2" GWB. Fire-retardant Plywood substantially reduces this emission, thus preventing you from suffocation. When this type of wood is exposed to a fire, it creates a non-combustible gas and water vapor to hinder combustion. Call us at (703) 972-1947 or contact us online today. Even when sprinklers are mandatory, the use of Interior Fire Treated Plywood can further reduce fire insurance rates. CA All of these elements must appear in the stamp, and building codes require that these stamps appear on wood treated with fire retardants. load bearing, 2" x 6" studs @16" o.c., w/ 1/2" GWB 1 side, 3/8" plywood over 1/2" fiberboard-side 2, 2" x 4" wood studs @16" o.c., load bearing, w/ 1 layer 5/8" GWB each side, 3-5/8" metal studs @ 16" o.c., non-load bearing, w/ layer of 5/8" GWB each side, 2" x 4" wood studs@ 16'" o.c., 1/2" non-rated gwb 1 side, other side 5/8" type X gwb, 2" x 4" wood studs, 12" non-rated gwb each side, 2" x 4" wood studs, 3-5/8" metal studs @ 16" o.c., non-load bearing, w/ layer of 1/2" GWB, 3-5/8" metal studs @ 16" o.c., non-load bearing, w/ 1 layer of 5/8" GWB each side, 6" metal studs @16" o.c., non-load bearing, 1 layer 5/8" GWB each side, 2" x 4" wood studs @16" o.c., load bearing w/ 1 layer 5/8" GWB each side, 3-5/8" metal studs @ 16" o.c., w/ 1 layer 1/2" Durock GWB against 15" concrete wall, 2" x 4" wood studs @16" o.c., (loaded @ 2250 lbs/stud) defective construction, 2 layers 5/8" GWB each side, 2" x 8" F/D joists @ 16" o.c., w/ 1/4" wood lath, 3/4" plaster, live load 40lbs, 2" x 10" F/D joists @ 16" o.c., w/ 1/4" wood lath, 3/4" plaster, live load 40lbs, 2" x 12" F/D joists @ 16" o.c., w/ 1/4" wood lath, 3/4" plaster, live load 40lbs, 2" x 8" F/D joists @ 16" o.c., w/ 1/4" wood lath, 3/4" plaster, span 10'-12' live load 60lbs, 2" x 10" F/D joists @ 16" o.c., w/ 1/4" wood lath, 7/8" plaster, live load 40lbs, 2" x 12" F/D joists @ 12" o.c., w/ 1/4" wood lath, 1" plaster, span 18' , live load 60lbs, 2" x 16" F/D joists @ 16" o.c., w/ 1/4" wood lath, 7/8" plaster, span 26', live load 60lbs, 2" x 8" F/D joists @ 16" o.c., w/ 1/4" wood lath, 1/2" plaster,, 1 layer 5/8" GWB, live load 40lbs, 2" x 4" F/D wood studs @ 16" o.c., w/ 1/4" wood lath, 1/2" plaster, 2" x 4" F/D wood studs @ 16" o.c., w/ 1/4" wood lath, 3/4" plaster, 4" x 12" F/D joists @12" o.c., w/2 layers 3/4" wood floor, 1" x 3" wood spacers, embossed tin, 2" x 12" F/D joists @16" o.c., w/1" x 6" T&G floor, 1" x 3" wood spacers, embossed tin, 2" x 12" F/D joists @16" o.c., w/2 layers of wood floor, 1-3/4" thick w/ 1/4" wood lath, 3/4" plaster, embossed tin, 2" x 12" F/D joists @16" o.c., w/2 layers wood floor, 1-3/4" thick, 1" x 4" wood spacers, embossed tin, 2" x 12" F/D joists @16" o.c., w/2 layers wood flooring, 1 layer 3/4" wood under embossed tin, 2" x 13" F/D joists @ 12" o.c., w/ 2 layers of wood floor, 1-3/4" thick w/ 1" x 3" spacers, embossed tin, 2" x 10" F/D joists @ 12" o.c., w/ 2 layers of 3/4" wood flooring, w/ 1" x 2" spacers, embossed tin, 2" x 10" F/D joists @ 12" o.c., w/ 2 layers of 1" wood flooring, w/ 1/4" wood lath, 3/4" plaster, 1" x 3" spacers, embossed tin, 3" x 8" F/D joists @16" o.c., w/ 1 layers T&G wood, 3/4" gypcrete, 3/4" T&G floor, 1" spacers, embossed tin, 3" x 14" F/D joists @ 22" o.c., w/ 1 layer 5/8" T&G pine floor, 1/4" lath, 7/8" plaster, embossed tin, 3" x 16" F/D joists @ 20" o.c., w/ 2 layers of wood floor 1-3/4" , 1/4" lath, 3/4" plaster, embossed tin, 3" x 10" LVL's sistered @24" o.c., w/3/4" T&G plywood floor, w/ 3/4" T&G wood ceiling, embossed tin, 2" x 12" F/D joists @ 16" o.c., w/ 2 layers 3/4" wood floor, 1" x 3" spacers, embossed tin, 2" x 13" F/D joists @ 12" o.c., w/ 2 layers wood flooring 1-3/4", w/ 1" x 3" spacers, embossed tin, 2" x 16" F/D joists @ 16" o.c., w/ 2 layers wood flooring 2", w/ 1" x 3" spacers, embossed tin, 2" x 10" F/D joists @ 16" o.c., w/ 1 layerof 1" wood flooring, w/ 1" x 3" spacers, embossed tin, 2" x 10" F/D joists @ 16" o.c., w/ 3/4" T&G wood flooring, w/1/4" wood lath, 3/4" plaster, embossed tin, 2" x 10" F/D joists @ 16" o.c., w/ 2 layers of 3/4" T&G wood flooring, w/1/4" wood lath, 3/4" plaster, embossed tin, 2" x 12" F/D @16" o.c., live load 40lbs. a 30 minute fire door) and usually relates to a composite, an assembled product or a constructed setup. system product alone constitutes a fire-rated assembly. These doors are fire rated for 30 minutes. Unfortunately, like most other types of wood-based building materials, plywood burns. To make it more heat-resistant and flame-retardant, builders use a special chemical treatment to make plywood fire-rated. Get free, zero-commitment quotes from pro contractors near you. The boards also carries 60 minute (Euroclass B) and 30 minute (Euroclass C) fire ratings under BS 476: Part 22: 1987 for use as an internal wall partition.